Glass door kit, frosted with 4 clear lines

Door in frosted security glass with 4 clear lines
Pakketprijs: € 229,00/ kit

* Verplichte velden

 

 

How to select the right glass door?

Glass door height:

Check if your glass door opening is 40 to 60 mm higher than the glass door.  When this is not the case you can either adjust your glass door opening or you can contact Woodeko for a quote on a custom made glass door. 

Height glass door opening   = height glass door + 40mm to 60mm

Height glass door opening   > 2050mm & < 2070mm

Glass door width:

Depending on your on the width of your glass door opening, you choose the width of your glass door.  Verify that the width of your glass door is min. 60 mm & max. 120 m smaller is than your glass door opening.  In case no glass door fits your glass door opening, you can adjust your glass door opening our you can contact Woodeko for a quote on a custom made glass door.

Width glass door opening               The glass door width needed

790 mm ~ 850 mm                           730 mm   

840 mm ~ 900 mm                           780 mm

890 mm ~ 950 mm                           830 mm

(*) Attention: not all widths are available for all type of glass doors.  Check glass door description

Wall thickness:

Check if a door frame of 165 mm is wide enough for your wall thickness.  You can do this by measuring the thickness of your wall on top, in the middle and at the bottom.  The width of your door frame needs to be wider or equal to the biggest value found.  This value is at the same time the thickness to which you will have to adjust your door frame.

Wall thickness                                  < of = 165 mm 

                      How to choose the right glass door height and width?

Kit
Totale prijs: € 229,00/ kit
BTW inbegrepen

Call our expert

0032(0)52 - 37.51.56

Fast and free delivery for purchases from € 500

Glass door kit, frosted with 4 clear lines

 

  • Glass door kit, frosted with 4 clear lines
  • Drawing
  • Handle
  • Hinges
Short description: Door in frosted security glass with 4 clear lines.
Production code: 0522X
Description: This unique glass door kit consists of a glass door, a glass door handle as well as 2 hinges.

Door

 
Dimension: 2010 mm (H) * 8 mm (T)  
Width: 730 mm / 780 mm / 830 mm
Finishing: Tempered - security glass
Pre-drilled: Yes, 2 hinge drillings + 1 door handle drilling
Packing:

1 door wrapped in plastic with hard plastic corners for protection

Design: 4 clear lines, frosted glass

Handle

 
Length: 400 mm  
Diameter: 25 mm
Construction: Stainless steel
Packing: Handle is packed together with 2 glass door hinges

Hinges

 
Length: 88 mm  
Width: 65 mm
Construction: Stainless look
Packing: Packed pro pair together with handle

- Read more online about installation

         Before getting started

         Installation of glass door in 3 steps

             Step 1: Preparation of doorframe & glass door

             Step 2: Fitting of doorframe & glass door in the wall opening

             Step 3: Final fitting glass door

- Download installation pdf

- Watch installation video

Before getting started

 

Read these instructions completely before starting

Door elements:

Please check if you have a glass door, a door frame, door architraves, 2 hinges and a glass door handle.  Furthermore it is important to know that these glass doors are reversible.  This means that they can be used right opening as well as left opening. The hinges and the door frame as well as the glass doors are especially designed for this. 

Attention: Smart glass doors can also be installed directly into a door opening. If you prefer this kind of installation, you of course do not need door frames & architraves. The door opening however needs to be adjusted to the available door sizes as security glass cannot be trimmed. For this kind of installation you need to make sure that your door opening is 10 mm wider and higher than the available door sizes and that your walls are perfectly leveled. 

Tools: 

During the installation you will also need montage glue, a glue pistol, PU montage foam (250 ml pro door), tape, a meter, a level, a few wedges, a saw, a cutter knife, a drilling machine and a pencil. 

Preparations: 

Check if the wall opening is +/-7 cm wider and 4 to 6 cm higher than the door leaf. This depends of the width of the chosen architraves. The opening between your frame and the wall will be covered by your architraves. 

Secondly it is important to verify if the width of the door frame is wide enough for your walls.  You can check this by measuring your walls on the top, in middle and at the bottom. The width of your frame needs to be larger or equal to the highest value found.  The found value is at the same time the width on which you need to trim your door frame. (width door frame) 

Choose the position and direction of your glass door.  Turning in or out of the room?  Left or right?  When you selected a matt Smart Glass door or a Smart Glass door with designs, it is also important to decide on which side you want to expose the matt side or designs as both sides have a slightly different feel(one has been made matt, the other side remains unprocessed security glass). Everything is possible with this reversible smart glass door.

Door elements

Tools

Width door

Width door frame

Installation of glass door in 3 simple steps

 

Step 1: Preparation of doorframe & glass door:

1.1   Trim your doorframe (left, right and top piece) on the right width. (See remark above, width door frame)

1.2   Saw the top piece of the frame in the right length.  Width door + 10 mm + 2x thickness door frame.  In case your door leaf is 830 mm wide & your door frame is 18 mm thick then you need to trim your top frame on 876 mm.

 

Step 2: Fitting of doorframe & glass door in the wall opening:

2.1    Fix the upper part of the frame on the vertical legs of the frame with 4 drill screws.

2.2    Fortify the door frame with slats - you can use the waste produced after trimming your door frame width to accomplish this - to give it more strength and to be able place it easily in the door opening.

2.3    Fix the door frame with a wedge min. 1 mm above the ground into the door opening. The 1 mm play is necessary to avoid damage by water.  Please ensure at the same time that 2 vertical legs of the door frame are level towards each other.  This is important in case your floor is not level.

2.4    Please fix the doorframe temporarily in place in the door opening with the help of wedges.  Do this between frame and wall at the upper left and right corner of the door opening.  

2.5    Level the jambs with the wall vertically as well as horizontally and fix the position temporarily with wedges.

2.6   Permanently fixing the door frame can be done in 2 ways:  

Option 1: Fix the doorframe permanently with PU foam: Apply a limited amount of montage foam between the wall and the doorframe.

Option 2: Fix the doorframe with distance screws. (Advice for heavy doors): Drill holes at the level of the hinges through the frame and into the wall.  Of course you need to determine the position of the hinges on the frame first. Do this by following the steps in point 3.5 however without actually fixing the glass door onto the frame. Screw the distance screws with a plug to fix the frame.  Apply a limited amount of montage foam between the wall and the doorframe.

2.7   Drying time +/- 60 min.  Remove surplus of foam with a knife.  Attention: only fill up the open joints partially. The foam expands after application.  

 

Step 3: Final fitting glass door:

3.1   Adjust the architraves to the length and the width of your doorframe.  All depending on your choice of architraves it might be required to saw the architrave miter.

3.2    Apply montage glue at the outer edge of the frame.  Place the architraves. Architraves should be fixed temporarily in place until fully attached to the frame (+/-25 min.). Position also the architraves 1 mm above the ground to avoid damage by moisture.  

3.3   Fix the hinge onto the glass door. Do this straight and leveled with the side of the glass door.  

3.4   Install the handle.

3.5   Place the door on two wedges of +/- 5 mm in the door frame. Secondly you only have to screw the hinges straight below each other onto the door frame. Initially only apply 2 screws pro hinge and check if the door is perfectly straight and leveled. Once this is verified, fix the glass door permanently in the door frame.

3.6   Apply some montage glue between the 1 mm play between the frame, the architraves and the floor to avoid damage by water.  

You have now successfully installed your glass door. In case you have installed this smart glass door with a frame you now need to finish your frame.

Step 1.1 glass door installation

Step 1.2 glass door installation

Step 2.1 glass door installation

Step 2.2 glass door installation

Step 2.4 glass door installation

Step 2.5 glass door installation

Step 2.6 glass door installation

Step 2.7 glass door installation

Step 3.2 glass door installation

Step 3.2 glass door installation

Step 3.3 glass door installation

Step 3.5 glass door installation 

 

- Read more online about finishing your glass doors

        Finishing of wooden or primed door frames

        Important notes

- Download installation pdf

Finishing of wooden or primed door frames

 

In case you have chosen for a wooden door frame than it is necessary to finish it fast -within one week after installation-.  Before finishing our frame it is necessary to sand, clean and degrease our frame. It is forbidden to finish the frames with a water based varnish.  Finishing with natural varnish may also accentuate glue marks so it is recommended not to do this. No guarantee is extended for this finish. It is recommended to finish these frames with an oil finish.

In case you have chosen for a primed door frame than it is necessary to treat them with a covering paint.  Before you do it is necessary to sand, clean and degrease your frame. Secondly you completely treat the frame 3x. Between every treatment you allow the paint to dry and sand it slightly before applying the next layer. (Grain 204) 

Oil

finishing 

Important notes

 

Before installation you need to verify if your home is dry enough.  Not so much for the Smart Glass doors itself but more importantly for the frames. The frames should only be installed when the wall moisture is equal or below 10%. 

These glass doors cannot be shortened. 

You can fortify your hinge drillings by using waste from your doorframe.  Saw 3 cubes of 3 cm by 8 cm from your doorframe waste.  Glue those at the back of your doorframe, leveled with the front of your doorframe and hinge drilling.  Further when fixing the hinge you screws through the frame and the fortification cubes.   

These glass doors are only suitable for internal use. 

Stock these glass doors and especially its frames dry and horizontal before installation. 

Treat your glass doors with care after removing the package to avoid that those get damage. 

The acceptance criteria of the VGI apply (www.vgi-fiv.be) for glass doors. 

Finishing care

Finishing care

finishing care